เครื่องกลั่นระเหยสารแบบหมุน

Lab Rotary Evaporator

• 0.25L, 0.5L, 1L, 2L, 3L, 5L optional.

  Condenser, flask, water bath, water bath lid,etc could buy separately.

  CE certification reliable quality, OEM customize.

  Mini Rotary Evaporator OEM Customization

  Rotary evaporator is an ideal instrument necessary for the concentration, drying and recycling relied on by the chemical industry, pharmaceutical industry, foods, environmental protection, universities and colleges, and research laboratories and so on, and especially adaptable to the small scale production unit.

   

  

  

  Technical parameters of rotary vacuum evaporator:

  Relevant Model	RE-2000A RE-2000AD	RE-3000A RE-3000AD	RE-5203	RE-5203A
  Rotating Flask(L)	2L + 1L	3L + 2L	3L	3L
  Optional Rotating Flask(L)	0.1L, 0.25L, 0.5L	0.5L, 1L	2L, 1L	2L, 1L
  Receiving Flask(L)	1L	2L , 1L	1L	1L
  Lifting Type	Automatic lifting	Automatic lifting	Hand lifting	Automatic lifting
  Condenser	Vertical	Vertical	Vertical	Vertical
  Rotation Speed (rpm)	20-200	20-200	0-150	0-150
  Reachable Vacuum Rate	0.098Mpa (SHB-III Vacuum Pump)
  Bath Power (kw)	1.5KW	1.5KW	1.5KW	1.5KW
  Staic Temp. Control Range & Wave (℃）	RT-99 (170) ±2	RT-99 (170) ±0.2	RT-99±0.2	RT-99±0.2
  Power	220V 50/60Hz	220V 50/60Hz	220V 50/60Hz	220V 50/60Hz

  * Note: Max evaporating speed is affected by operation setting and the performances and matching levels of supporting equipment.

  “A”-Automatic lifting.                    “AD”-Automatic Lifting 170℃ Oil Bath.

  Functional configurations of TOPTION lab rotary evaporator:

  Relevant Model	RE-2000A RE-2000AD	RE-3000A RE-3000AD	RE-5203	RE-5203A
  PTFE Seal Assembly	Have
  Continuous Charge
  Digital Display	Bath Temp. Rotation Speed	Bath   Temp. Rotation Speed	Bath Temp.	Bath Temp.
  Taper Joint PTFE Sleeve	Have
  Low Noise	Have
  Bath Lift	Have
  Thermometer Neck For Vapor	Optional
  Cold Trap	Optional	Optional	Optional	Optional
  Water Bath Lid	Optional
  Joint Adaptor	Optional
  Optional   Evaporating Flask	0.5L	0.5L,   1L	100ml, 250ml, 500ml, 1L	100ml,   250ml, 500ml, 1L

  Main structure features of rotary evaporator laboratory instrument:

  1.Main engine component: use antirust aluminium alloy, special engineering plastics, high temperature resistant high quality glass.Compact structure, beautiful appearance, durable and long service life.

  2.Main engine transmission: Using precision gear motor, electronic speed, gear and rack type transmission device.Increase the shaft tube aperture, so evaporation tube is 1.5 times bigger than general instruments, improve the efficiency of evaporation.

  3.Lifting structure: use mechanical and electrical contact principle, hydraulic auxiliary drive to rising fast, steady decline functions, improve the efficacy.

  4.Evaporating pipeline: high quality high temperature resistant glass, fluoroplastics recombination. Two end connect with “silicon fluoride compound sealing ring”, good vacuum sealing performance. Long service life, and coud disassemble to clean and change.

  5.Heating bath: use teflon aluminium alloy recombination bath Ø23 * 13cm, outside has special engineering plastic to protect. Fully enclosed electric heater is installed on the antirust aluminum alloy botton case, stable and reliable, and could move according to evaporation request.

  6.Vacuum meter: design equipped with vacuum meter and valve ( prevent the liquid in vacuum pump back flow in rotary evaporator’s glass vessels, help you achieve research success in one time), when vacuum degree becomes the lowest, close valve to keep the vacuum degree display in rotary evaporator, decrease the noise in laboratory, longer the service life of vacuum pump.