With 7.0 inch touch screen system, 3 way water quality sensor, 2 way flow sensor for quantified dispensing, 2 stage RO system and EDI module, Center-EDI series ultrapure water system is top choice of high flux ultrapure water for high grade experiments. With tap water inlet, its output ranges from 45 to 90 liters/hour. It can produce deionized water and ultrapure water. The deionized water’s resistivity is above 10 MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP. |
Flow Schematic
Specifications
| Model | Standard | Eliminating endotoxin | Low TOC | Synthesizing |
| Center-EDI 45/60/90 | Center-EDI 45/60/90F | Center-EDI 45/60/90V | Center-EDI45/60/90FV | |
| Output -EDI water* | 45series-45 liters/hour, 60 series-60 liters/hour, 90 series-90 liters/hour | |||
| Output -ultrapure water | Up to 2 liters/minute (when tank is full) | |||
| Ultrapure water quality | ||||
| Resistivity(25°C) | 18.2MΩ.cm | |||
| TOC* | <10ppb | <10ppb | <3ppb | <3ppb |
| Bacteria | <0.01cfu/ml | |||
| Particle(>0.2&Micro;m) | <1/ml | |||
| Endotoxin | N/A | <0.001Eu/ml | N/A | <0.001Eu/ml |
RNases | N/A | <1pg/ml | N/A | <1pg/ml |
DNases | N/A | <5pg/ml | N/A | <5pg/ml |
EDI water quality | ||||
| Resistivity | >10MΩ.cm | |||
| TOC* | <30ppb | |||
| Silicone rejection rate | >99.9% | |||
| RO water quality | ||||
| Conductivity - 1st stage RO water | Feed water conductivity×5%* | |||
| Conductivity - 2nd stage RO water | 1-5&Micro;s/cm* | |||
| Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |||
| Dimension and weight | Length × Width × Height: 610×585×1580mm / Weight: about 75Kg | |||
| Electrical requirements | AC110-240V, 50/60Hz | |||
| Power | 480W | |||
| Standard configuration | Main body (Including 1 set of cartridge)+built-in 20 liters PE tank and 20 liters pressure tank | |||
Cartridges | |||
| Item no. | Commodity | Approximate replacement term /set | |
| C-PP | Pretreatment cartridge | 2-6 months | |
| C-AK | KDF+ granular active carbon mixed cartridge | 12 months | |
| C-AC2 | Active carbon block cartridge | 6 months | |
| C-RO-200 | 200 GPD reverse osmosis membrane | 12-24 months | |
| C-RO-300 | 300 GPD reverse osmosis membrane | 12-24 months | |
| C-RO-400 | 400 GPD reverse osmosis membrane | 12-24 months | |
| C-RO-500 | 500 GPD reverse osmosis membrane | 12-24 months | |
| C-RO-600 | 600 GPD reverse osmosis membrane | 12-24 months | |
| C-EDI-HX50 | EDI module | 12-36 months | |
| C-EDI-HX100 | EDI module | 12-36 months | |
| C-Decart1 | High flux mixed bed resin cartridge | 35000 liters pure water | |
| C-Pocart3 | High flux ultrapure polishing resin cartridge | 35000 liters pure water | |
| C-Pocart4 | Ultrapure polishing resin cartridge | 5000 liters pure water | |
| C-Uvlcart-14W | (254&185)nm wavelength uv module | -- | |
| C-Uvlamp-14W | (254&185)nm wavelength uv lamp | 9000 hours | |
| C-Ufcart | Eliminating endotoxin uf cartridge | -- | |
| C-Tefit | 0.2µm terminal filter | -- | |


This website uses cookies (Learn more) and has a privacy policy (Learn more).



