Super series, integrating 7.0 inch touch screen system, 4 way water quality sensor, 3 way flow sensor for quantified dispensing, Ionpure EDI module, 2 stage RO and 3 pump system, built-in TOC module, and with tap water inlet, its output is 10 liters/hour. It can produce Edi water and ultrapure water. The Edi water´s resistivity is above 5MΩ.cm, and TOC is lower than 30ppb. The ultrapure water´s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.

Features and Advantages

Colorful touch screen 7.0 inch colorful high-resolution touch screen (16:9) controlling system, achieve finger-touch new experience.
Comprehensive monitoring system 4 way online water quality sensor, detect the quality of feed water, 2nd stage RO water, Edi water and ultrapure water respectively. And warn once water quality´s standard exceeding. 3 way flow sensor, count source water consumption and achieve quantified dispensing of Edi and ultrapure water.
Integrate with Ionpure EDI module Without softener, chemical regeneration and replacing any DI cartridge, its pure water´s resistivity will be above 5MΩ.cm(25°C), and TOC is lower than 30ppb. It will reduce the running cost and emissions of waste water. The maximum output is 240 liters per day.
Double stage reverse osmosis technology With 2 pumps, 2 RO membranes and buffer tank, system assures 2nd stage RO water quality´s stability from different source water, and achieves little drain and low running cost.
Built-in 3 pump system 1st stage RO pump, 2nd stage RO pump and circulating sanitizing pump
Built-in online TOC monitor module (TOC model) Independent TOC monitor module It can be taken out to monitor any other ultrapure water
All Cartridges replacing alarm function, based on time, flux and water quality, show cartridges´ used and residual life. Multiple alarm function: no feed water, full water, water quality´s standard exceeding, cartridge life ending and leakage. Auto self-flushing of RO membrane function (interval and continuous time setting), extend RO membrane´s life. Auto running data storing function with built-in SD card, and data can be exported through the USB interface. System continuous upgrading function through USB interface, and WIFI module is optional. Built-in perpetual calendar clock for cartridges and service setting. System sanitizing procedure, achieve the disinfection of ultrapure water´s tube and valve. System circulation function, achieve ultrapure water´s circulation to keep top quality of ultrapure water. Level II password, protect all the parameters setting, and prohibit any unauthorized setting change. Attached 50 liters water tank with conical bottom, including air filter, to prevent co2 and bacteria. Also external tanks is optional. Whole plastic shell with high-strength, avoid rusting and keep clean, to meet GLP standard. 4 door and easy-to-replacing cartridge design, convenient to maintain system and replace cartridges. Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water´s quality. Optimized pretreatment (including PP fiber, KDF and active carbon cartridge), effectively protect RO membrane. RO module with DOW´s membrane, ensure long life, stable operation and high desalinization rate. Ultrapure cartridge with DOW´s top polishing resin, ensure ultrapure water´s quality up to 18.2 MΩ.cm, with the lowest TOC level. Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria´s increase and reduce TOC. MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF. (0.45+0.1)µm double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.

Flow Schematic

Specifications

Model	Standard	Eliminating endotoxin	Low TOC	Synthesizing	Built-in TOC module
	Super 10	Super 10F	Super 10V	Super 10FV	Super-TOC10V	Super-TOC 10FV
Output-EDI water*	10 liters/hour
Output-ultrapure water	Up to 2 liters/minute (when tank is full)
Ultrapure water quality
Resistivity(25°C)	18.2MΩ.cm
TOC*	<10ppb	<10ppb	<3ppb	<3ppb	<3ppb	<3ppb
Bacteria	<0.01cfu/ml
Particle(>0.1µm)	<1/ml
Endotoxin	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml	N/A	<0.001Eu/ml
RNases	N/A	<1pg/ml	N/A	<1pg/ml	N/A	<1pg/ml
DNases	N/A	<5pg/ml	N/A	<5pg/ml	N/A	<5pg/ml
EDI water quality
Resistivity(25°C)	>5MΩ.cm
TOC*	<30ppb
Silicon rejection rate	>99.9%
Feed water requirements	Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2
Dimension and weight	Length×Width×Height:545×470×639mm, 28Kg
Electrical requirements	AC200-240V, 50/60Hz
Power	240W
Standard configuration	Main body (Including 1 set of cartridge)+50 liters PE tank (TOC model:+ built-in TOC module)

Remarks:

*The value will be influenced by temperature and feed water´s quality.

Cartridges
Item no.		Commodity	Approximate replacement term /set
D-PP1		Pretreatment cartridge	2-6 months
D-AK		KDF+ granular active carbon mixed cartridge	12 months
D-AC2		Active carbon block cartridge	6 months
D-RO-100		100 GPD reverse osmosis membrane	12-24 months
D-RO-200		200 GPD reverse osmosis membrane	12-24 months
D-SF		Water softener cartridge	6 months
D-EDI10-IP		EDI module	36 months
D-Uvlamp-14W		(254&185) nm wavelength uv lamp	9000 hours
D-Pocart4		Ultrapure polishing resin cartridge	5000 liters pure water
D-Ufcart		Eliminating endotoxin uf cartridge	-
D-Tefit		(0.45+0.1µm) terminal filter	-