จรัญเอสโซซิเอทส์ (Charan Associates)

เครื่องน่ำฆ่าเชื้อ - ALP -stream sterilizer KT series Type Vertical Autoclave

฿1.00

เครื่องน่ำฆ่าเชื้อ - ALP - stream sterilizer KT series Type Vertical Autoclave

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : เครื่องนึ่งฆ่าเชื้อ / Autoclave
รหัสสินค้า : 001566

รายละเอียดสินค้า เครื่องน่ำฆ่าเชื้อ - ALP -stream sterilizer KT series Type Vertical Autoclave

ALP Autoclave KT series

KT series

KT series (φ23cm,φ30cm)
KT-23/DP(20L), KT-30S/DP(32L), KT-30L/LDP(45L), KT-40S/SDP(62L), KT-40/40DP(82L), KT-40L/40LDP

Analogue model with simple operation

Product Specification ALP Autoclave KT Series

ALP Autoclave KT Series

Specifications

Model	Sterilization only	KT-23	KT-30S	KT-30L	KT-40S	KT-40	KT-40L
	With warm air drying	KT-23DP	KT-30SDP	KT-30LDP	KT-40SDP	KT-40DP	KT-40LDP
Chamber ( inner dia x depth )		23 ¢ X 46 cm	30 ¢ X 45 cm	30 ¢ X 64 cm	40 ¢ X 50 cm	40 ¢ X65 cm	40 ¢ X 83 cm
Usable capacity		20 L	32 L	45 L	62 L	82 L	105 L
Ability	Usable max. press.	0. 1.6 MPa ( 1.6 kg/cm² )
	Usable max. temp.	127 ºC
	Sterilization	110-127 ºC
	One-touch setting temp.	110, 115, 121, 127 ºC
Sterilization System	System	Saturated steam generated by sheathed electric heater
	Main controller	Precise pressure switch
	Temp. set system	Analog temperature set on the panel of pressure switch
	Temp. indicator	Saturated steam scale on the panel of pressure gauge
	Timer	1 ~ 60 min. ( Operates after the set temperature is reached.)
	Operation start	PUSH-ON start button switch
	Air exhaust valve	Automatic exhaust system of remained air by heat expansion bellows valve
	Water lack preventor	Automatic cut-off system by a sensitive thermostat ( Warning by buzzer and lamp )
	Exhaust valve	Manual needle valve being opened only in required rapid exhaust Drain valve Manual ball valve ( Inner dia. : 10 mm )
Sterilization pattern		PUSH-ON start → Heating, Air exhaust → Sterilization → Completion buzzer → Exhaust or natural cooling
KT-DP Models	Operation pattern with drying	PUSH-ON start → Heating, Air exhaust → Sterilization → Completion buzzer
		Open DRAIN valve ( by manual ) while pressure remains → Pressure goes down to zero
		Switching from STER. to DRY ( by manual ) → Set drying time → PUSH-ON drying start → Drying
		→ Drying completion buzzer
	Drying devices	Warm air circulating and discharge by electric heater and air pump through 0.2 µm HEPA cartridge filter
		Drying temperature : 130 ºC ( changeable by inner dia l ), Timer 0 - 60 min.
Safety	Safety devices	Water lack preventer. Saftey valve			Water lack preventer, Saftey valve
					Over pressure saftey switch
	Electric safety	Breaker for over current			Breaker for over current & slight leakage
		Withstand valtage : 1.500 V, 1 min. Insulation : 100 MΩ-( 500 V.D.C )
	Safety valve operation	0.18 MPa
	Water test pressure	0.36 MPa
Material	Chamber & lid	Stainless steel SUS304 shiny polished. Lid gasket : Molded silicon rubber
	Outer panel	Upper surface : SUS443J 1, Main body : Steel with baked enamel, Caster ( front two with stopper )
Power requirement		AC 110 / 120 / 220 / 230 / 240 V, 1Ø 50/60 Hz
( 50/60 Hz )		1.5 kW	2.0 kW		4.0 kW
Outer size WxDxH		53 X 40 X 87 cm	60 X 40 X 87 cm	60 X 40 X 95 cm	73 X 57 X 76 cm	73 X 57 X 91c m	73 X 57 X 109 cm
Weight		35/40 kg	49/54 kg	53/58 kg	67/76 kg	72/81 kg	86/95 kg
Accessories	Stainless wire basket	21Ø x 40 cm	27Ø x 40 cm	27Ø x 30 cm	38Ø x 20 cm	38Ø x 30 cm	38Ø x 40 cm
	( except KT-DP models )	1 pc	1 pc	2 pcs	2 pcs	2 pcs	2 pcs
	Tank & hose	Exhaust drain receiver tank			Exhaust drain receiver tank Stainless drain hose
	KT-DP models	Stainless drain hose ( Stainless wire basket : option )